Loading method of wood-catching machine
* : * : admin * : 2021-06-19 12:22:11 * : 8
Loading method of wood grabbing machine
First of all, no matter where the wheel type wood grabbing machine is, it has different working conditions and environments, and has common points in operation. Before the wheel type car is ready to stop for work, it should ensure the steering wheel is correct, so as to reduce the pressure impact of the whole vehicle swing on the steering mechanism during operation The rear outrigger and other auxiliary equipment should also be selectively applied according to the different needs of the actual working conditions. However, in order to fully protect the lower chassis components of the wood grabbing machine from the working pressure, it is necessary to lift the weight tires of the wood grabbing machine off the ground.
Secondly, during the operation of rotary operation, the surrounding environment should be visually inspected to ensure sufficient operation radius and full range. Temporary isolation fences should be set up when working in densely populated operation sites, and attention should be paid to the surrounding areas at all times to avoid injury incidents. Due to the rapid penetration of fast-paced cutting in the field of wood grabbing, accidents also occur frequently, so remember that, The problem is the root of all problems, and it is also the basic guarantee of sustainable income.
Next, let's give a detailed introduction to the loading methods of wheel type wood grabbing machine under different working conditions. Take the northern market as an example, for example, Henan, Jiangsu, Anhui, Shandong and other places, most of them are wood transfer stations, dense wood is all over the site, and the loading and unloading vehicles are mainly board cars and high hurdle cars, The wood grabbing operation of the wood grabbing machine is generally loading or unloading on the side of the loading and unloading vehicle. The wood is placed in the direction or crosswise according to the length of the wood and the type of loading and unloading vehicle. This kind of wood loading form can give full play to the effective operation advantages and operation convenience of the wheel type wood grabbing machine.
However, for some timber planting areas in the south, such as Guangxi and Guangdong, where Eucalyptus is planted intensively in hilly terrain, the wood grabbing and loading operation after felling poses a great challenge to this kind of wheel type wood grabbing machine. For the rugged and narrow mountain roads, most of the roads are temporarily built to transport vehicles and wood grabbing machines, and their width is not suitable for side loading, Therefore, the tail loading has become a more common operation mode in this area, which puts forward higher requirements for the arm length and working range of the wheel type wood grabbing machine. The actual users in the local market reflect that among many wood grabbing machine brands, as long as Dezhou Baoding and other few wood grabbing machine brands can fully meet the local actual working conditions.